ND-70348 (E) CHAPTER 4
Page 594-1
Revision 5.0
ACFON
ACFON : Assignment of Call Forwarding Data for NDM
1. General
This command is used to assign various call forwarding service data on system-wide via Netfusing link. The
destinations of forwarded calls can be the attendant console, a station, or an outside party. The destination sta-
tion is to be designated by the Telephone Number previously assigned by the ALGSN command. The data as-
signed by this command is written in network Data Memory (NDM) of the Network Control Node (NCN),
updating the NDM at each Local Node (LN).
2. Precautions
1. The parameter ADC is required only when “Night Connection Outside” is selected in “CF” parameter.
The Abbreviated Digit Codes (ADC) and the speed dial number are assigned by the ASPD command.
2. This command is available since Release 11 software enhancement.
3. Data Entry Instructions
ADC
Enter the ADC to the forwarded destination
when “CF = Night Connection Outside” is
selected.
CFI
ATT: Forwarded to Attendant Console
TELN: Forwarded to Station
CF
Select the type of call forwarding service.
1 = Call Forwarding – Busy Line
2 = Call Forwarding – Don’t Answer
3 = Call Forwarding – Intercept
4 = Night Connection Outside
TELN
Enter the Telephone Number of destination station to
which the call is to be forwarded. This parameter
appears when
“TELN” is selected in “CFI” parameter.
USER
GROUP
NUMBER
(UGN)
CALL
FORWARDING
SERVICE
(CF)
TELEPHONE NUMBER
(TELN)
Max. 16 digits
ABBREVIATE
DIGIT CODE
(ADC)
Max. 4 digits
CFI
CALL FORWARDING DESTINATION
To Next Page
Loading...
Need help?
General