ND-70348 (E) CHAPTER 4
Page 690
Revision 3.0
ANSDL
ANSDL: Assignment of Number Sharing Data for LDM
1. General
This command is used to assign and delete Main Station and Sub Station data for Number Sharing service or
Dual Station Call service.
2. Precautions
1. This command is available for Release 3 or later software.
2. This command is used for the Local Node.
3. For detailed information on Number Sharing service, see “Built-In PHS System Manual”.
3. Data Entry Instructions
0 = Number Sharing
1 = Dual Station Call
LM
0 = Only Main Telephone Number is used for SMDR and MCI Mail Box Numbers
1 = Both Main Telephone Number and Sub Telephone Number are used for SMDR
and MCI and VPS Mail Box Numbers
Note : When this parameter is set to 0 , the mail box for Sub Station must be deleted.
OD
SERVICE
SPECIFICATION
(LM)
0/1
OUTPUT EXTERNAL
EQUIPMENT
(OD)
0/1
MESSAGE WAITING
CONTROL
(MW)
0/1
TELEPHONE EQUIPMENT NUMBER
(INDEX)
1-65535
0 = Message Waiting Control for Main and Sub Telephone Numbers
1 = Message Waiting Control for Main Telephone Number only
MW
MAIN USER
GROUP
NUMBER
(M-UGN)
SUB USER
GROUP
NUMBER
(S-UGN)
MAIN TELEPHONE NUMBER
(M-TELN)
MAX. 16 digits
SUB USER GROUP NUMBER
(S-TELN)
MAX. 16 digits
To Next Page
Loading...
Need help?
General