ND-70348 (E) CHAPTER 4
Page 603
Revision 3.0
ACNP
ACNP: Assignment of Calling Number Pattern Data
1. General
This command is used to assign the Calling Number Pattern (CNP) to the route which is used for the SID To
Network-Present service/for the Calling Party Recognition service.
2. Precautions
1. Enter a B-Channel Route Number in the RT parameter.
2. The CNP is an intermediate parameter to assign the SID by the ACND command.
3. Data Entry Instructions
KING OF
CONNECTION
(IC/OG)
I/O
CALLING NUMBER
PATTERN
(CNP)
1-255
ROUTE NUMBER
(RT)
REMARKS
RT
Enter the route number of the B-channel
IC/OG
I = Incoming Call (Calling Party Recognition)
O = Outgoing Call (SID To Network-Present)
CNP
Enter the arbitrary number within the range
between 1 and 255.
To Next Page
Loading...
