ND-70348 (E) CHAPTER 4
Page 514
Revision 3.0
ASHPN
ASHPN: Assignment of Station Hunting Group-Pilot for NDM
1. General
This command is used to assign the data related to the Station Hunting - Pilot for Netfusing Service. The data
assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN),
updating NDM at each Local Node (LN).
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Pilot service feature related data.
2. The maximum number of member stations within a Hunting Group is 100, not including the Secretary Sta-
tion. It cannot be executed to assign a station belongs to other Station Hunting Group in duplicate.
3. The Pilot station number is assigned in the TELN parameter.
3. Data Entry Instructions
Note: Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
USER GROUP
NUMBER (UGN)
SECRETARY TELEPHONE
NUMBER (SECRETARY TELN)
Max. 16 digits
TELEPHONE
NUMBER (TELN)
Max. 16 digits
TELN TELN TELN TELNNUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
STATION NUMBER (STN)
SECRETARY TELN
Enter the secretary station number if required.
Fixed to 1
UGN
2
3
4
5
27
28
29
30
52
53
54
55
77
78
79
80
To Next Page
Loading...
Need help?
General