NEC NEAX 7400 IMX - ACPEL: Assignment of Call Pickup Expand Group Data for LDM

ND-70348 (E) CHAPTER 4
Page 544
Revision 3.0
ACPEL
ACPEL: Assignment of Call Pickup Expand Group Data for LDM
1. General
This command is used to assign the data related to Call Pickup Expand Group - LDM service. With this com-
mand, Call Pickup Expand Group service feature can be assigned by using Telephone Number.
2. Precautions
1. Prior to this command, assignments of station are required by the ACPGL command.
2. The maximum number of member stations within each Call Pickup Expand Group is 100.
3. There is no limitation on the number of Call Pickup Expand Group within a system.
4. One station can be assigned to the member of only one Call Pickup Group.
5. Either Call Pickup Expand Group for LDM or Call Pickup Expand Group for NDM can be executed in a
system. (Both services can’t coexist in a system.)
6. The data assigned at this command is invalid in Netfusing system.
7. This command is available since Release 7 software enhancement.
3. Data Entry Instructions
Note: Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
USER GROUP NUMBER
(UGN)
TELEPHONE NUMBER
(TELN)
Max.16 digits
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
TELN
A Telephone Number of Call Pickup Group member
station.
2
3
27
28
52
53
77
78
UGN
Fixed to 1.
1