ND-70348 (E) CHAPTER 4
Page 599
Revision 3.0
ARPC
ARPC: Assignment of Remote Point Code for Centralized Service
1. General
This command is used to assign the data related to the Message Center Interface - CCIS service feature.
2. Precautions
1. This command is used only at the main office of the Message Center Interface - CCIS service feature.
2. The MCI is installed at the main office of the CCIS network, and the MCI text is transmitted (or received)
to (from) the external VMS when an event treated by the MCI service feature has occurred at the satellite
office.
3. Data Entry Instructions
REMOTE POINT CODE COUNTER
(CNT)
1-32
CENTRALIZED SERVICE NUMBER
(CSN)
1-7
REMOTE POINT CODE
(RPC)
1-16383
REMARKS
1
1
2
3
CSN
RPC
1 = Message Center
2-7 = Not used
Enter the PC of the satellite office.
To Next Page
Loading...
Need help?
General