ND-70348 (E) CHAPTER 4
Page 788
Revision 3.0
AGST
AGST: Assignment of Guest Station Data
1. General
This command is used to assign and delete Guest Room Data.
2. Precautions
1. This command is used for the Hotel Application only.
2. The AGSN command is used to change the station number, and the AGCL command is used to change the
Class data (TEC, RSC, SFC, etc.).
3. Only Telephone Equipment Classes (TECs) 5-8, 10, and 12 may be assigned Guest station.
4. The number of digits for a station number are designated by the ASYD command, SYS1, INDEX 16.
The maximum number of digits for a station is 6.
5. The first digit of a station number is designated by the AGNP command.
6. The RSC and SFC data work in conjunction with ARSC/ASCR/ADNR and ASFC commands.
To Next Page
Loading...
Need help?
General