NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 460
Revision 3.0
ATRK
3. Data Entry Instructions
• Internal Trunk Route / External Trunk Route (RT number except 901)
Enter the external trunk route number (1-255) assigned by the ARTD command, or the internal trunk route
number as listed below;
901=ATT 902=ORT 903=IRT 904=MFR 905=SND
906=PBR for Automated Attendant Service 907=AMP 909=DCFT
913=DCFT for ATT 915=Night ATT
916=MFCR 917=MFCS 919=DLINT (for Hotel);MODEM (for Business)
920-926=MODEM Pooling Trunk 929=DST 930=RCT 933=CRT
934-936=Not used 937=Modem Sender 938=DLMX
939-947=Not used
1-255
1
2
3
9XX
RT
ROUTE
NUMBER
(RT)
TRUNK
NUMBER
(TK)
LINE EQUIPMENT NUMBER
(LENS) 6 DIGITS
MG U G LV
TENANT
NUMBER
(TN)
REMARKS
The TN Parameter is appended when the external
trunk route number is entered in RT parameter.
TN
Enter unique trunk number with a range from 1 to 255.
TK
MG:00-07, Unit:0-3, Group:20 ,
Level:0 and/or 1 for ATT
LENS
SFC=0 should be assigned for ATT.
SFC
REMARKSTENANT
TENANT
NUMBER
(TN)
CNT
1-10
SERVICE
FEATURE
CLASS
(SFC)
0-15
ROUTE
RESTRICTION
CLASS
(RSC)
0-15
LINE EQUIPMENT NUMBER
(LENS) 6 DIGITS
TRUNK
NUMBER
(TK)
ROUTE
NUMBER
(RT)
LVGUMG
RSC=0 should be assigned for ATT.
RSC
RT=901 for ATT.
RT
TK
Enter unique number as the
Attendant Console number
02901
◆ Attendant Console (RT=901)
◆ External/Internal trunk route

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English