NEC NEAX 7400 IMX - ASHCL: Assignment of Station Hunting Group-Circular for LDM

ND-70348 (E) CHAPTER 4
Page 517
Revision 3.0
ASHCL
ASHCL: Assignment of Station Hunting Group-Circular for LDM
1. General
This command is used to assign the data related to the Station Hunting - Circular service feature. With this com-
mand, Station Hunting Group - Circular can be assigned by using Telephone Number.
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Circular service feature related data.
2. The maximum number of member stations within a Hunting Group is 100, not including the Secretary Sta-
tion. It cannot be executed to assign a station belongs to other Station Hunting Group in duplicate.
3. There is no limitation on the number of Circular groups in a system.
4. The data assigned at this command is invalid in Netfusing system.
5. This command is available since Release 7 software enhancement.
3. Data Entry Instructions
Note: Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
USER GROUP
NUMBER (UGN)
SECRETARY TELEPHONE
NUMBER (SECRETARY TELN)
Max.16 digits
TELEPHONE NUMBER
(TELN)
Max.16 digits
TELN TELN TELN TELNNUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
STATION NUMBER (STN)
SECRETARY TELN
Enter the secretary telephone number
if required.
Fixed to 1.
UGN
2
3
4
5
27
28
29
30
52
53
54
55
77
78
79
80
TELN CNT 2-100
Telephone Number of the member stations.
1