ND-70348 (E) CHAPTER 4
Page 238
Revision 3.0
ASPA
Table 4-6 EQP parameter
Note: EQP3 and 5-14 can be used for SRV=ANNC.
DATA MEANING DATA MEANING
0 Dead Level Number 33 Not Used
1 Unused Number 34 Automated Attendant (1st Announcement)
2 Remote Access to PBX 35 Automated Attendant (2nd Announcement)
3 May be used for other purposes Note 36 Slumber Time - Do Not Disturb
(for Slumber Time Group 1)
4 Outgoing Trunk Busy Announcement 37 Slumber Time - Do Not Disturb
(for Slumber Time Group 2)
5-14 May be used for other purposes Note 38 Slumber Time - Do Not Disturb
(for Slumber Time Group 3)
15 Alert Service (for Hotel system) 39 Slumber Time - Do Not Disturb
(for Slumber Time Group 4)
16 Timed Reminder Set Message (for Business system)/
Service Set-up Message (for Hotel system)
40 Slumber Time - Do Not Disturb
(for Slumber Time Group 5)
17 Service Set-up Failure Message (for Hotel system) 41 Slumber Time - Do Not Disturb
(for Slumber Time Group 6)
18 Timed Reminder Cancel Message (for Business
system)/Service Cancel Message (for Hotel Message)
42 Slumber Time - Do Not Disturb
(for Slumber Time Group 7)
19 Service Cancel Failure Message (for Hotel system) 43-48 Not Used
20 Room Cut-Off Announcement (for Hotel system) 49-53 Delay Announcement Attendant (1st Announcement)
21 Do Not Disturb Announcement (for Hotel system) 54-58 Delay Announcement Attendant (2nd Announcement)
22 Timed Reminder/Wake up Call Message for
Announcement Trunk
59-
121
Not Used
23-31 Group Announcement (for Hotel system) 122-
125
Multiple Announcement
32 Delay Announcement-Attendant
(for U.S.A/Canada only)
126-
127
Not Used
Assign the tenant number of
the announcement trunk.
When SRV=ANNCM (Announcement service-Multiple announcement) is assigned;
TN
TENANT NUMBER
(TN) 1-63
ANNOUNCEMENT EQUIPMENT NUMBER
(EQP) 122-125
Assign the announcement equipment number with a
range from 122 to 125 (Multi announcement).
EQP
To Next Page
Loading...
Need help?
General