ND-70348 (E) CHAPTER 4
Page 794
Revision 3.0
AGSN
AGSN: Assignment of Alternated Guest Station Number
1. General
This command is used to change a currently assigned Guest Station Number.
2. Precautions
1. This command is used for the Hotel Application only.
2. Input a number which is not currently assigned. If a station number currently being used to be assigned as
a new number, delete the station first via the AGST command.
3. When the “PKG CHECK” message is displayed during assignment, conform the LENS location of the cir-
cuit card (PA-16LC, etc.) accommodating the station, then depress the ENTER key.
4. When you have changed the station number, update the data sheet for the AGST command.
To Next Page
Loading...
