ND-70348 (E) CHAPTER 4
Page 636
Revision 3.0
ACAN
ACAN: Assignment of CIC Number Between Adjacent Node for LDM
1. General
This command is used to assign LENS and Fusion Circuit Identification Code (Fusion CIC) numbers on the ba-
sis of each Fusion Point Code (FPC).
2. Precautions
1. Before executing this command, confirm that the following assignments have already been completed:
(a) LSG: 12 (the ACRD command) is assigned to the B-channel Route to which the Fusion CIC belongs.
(b) The trunk data for the Fusion CIC is assigned by using the ACTK command.
2. The FCIC given to each B-channel should be identical to the originating node and its adjacent node.
3. The available FCIC (Fusion CIC Number) is 1-4095.
4. For more detailed information, see the “Netfusing System Manual”.
3. Data Entry Instructions
FUSION POINT CODE
(FPC)
1-253
REMARKS
FPC
FPC is a unique number
allotted to each node.
Assign FPC of the adjacent node
to this parameter.
Fusion CIC number of
the adjacent node
10
10
10
FUSION CIC NUMBER
(FCIC)
1-4095
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
1
2
1
2
3
CONNECTION EQUIPMENT
NUMBER (C_LENS)
FCIC
C_LENS
LENS of the trunk for B-channel
assigned by the ACTK command
To Next Page
Loading...
Need help?
General