NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 553
Revision 5.0
ASGDL
ASGDL : Assignment of Special Group Data for LDM
1. General
This command is used to assign the stations which belong to the special group applied to the following service
features:
Off Hook Alarm
Priority Call
The member stations are specified by Telephone Number previously assigned by the ALGSL command. This
data is written in the Local Data Memory (LDM).
2. Precautions
1. The call destination of the special group is designated by the ASIDL command.
2. Since the GN parameter is intermediate data to the ASIDL command, enter a unique number for each spe-
cial group.
3. This command is available since Release 11 software enhancement.
3. Data Entry Instructions
USER
GROUP
NUMBER
(UGN)
TELEPHONE NUMBER
(TELN)
Max. 16 digits
FUNCTION
NUMBER
(F)
0-7
GROUP
NUMBER
(GN)
1-255
REMARKS
TELN
Enter the Telephone Number
of the station which belongs to
the special group.
GN
Enter a unique Group Number for
each special group.
F
4=Priority Call 1
5=Priority Call 2
6=Priority Call 3
7=Not used
0=Off Hook Alarm
1=Not used
2=Not used
3=Not used

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English