ND-70348 (E) CHAPTER 4
Page 533
Revision 3.0
AUOGN
AUOGN: Assignment of UCD Overflow Group for NDM
1. General
This command is used to assign the data related to the Overflow - UCD for Netfusing Service. The data assigned
by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updat-
ing the NDM at each Local Node (LN).
2. Precautions
1. The UCD member station and the UCD pilot (controlling station) station should be assigned by the
ASHUN command.
2. The calls terminate to the designated group can overflow (forward) to another UCD group. They overflow
from UGN-A, TELN-A to UGN-B, TELN-B.
3. Data Entry Instructions
TELEPHONE
NUMBER
(TELN-A)
TELEPHONE
NUMBER
(TELN-B)
USER
GPOUP
NUMBER
(UGN-A)
USER
GPOUP
NUMBER
(UGN-B)
UGN-B and TELN-B
UGN-B and TELN-B (UCD pilot station number) parameters should be assigned
with respect to the data assigned by the ASHUN command.
UGN-A and TELN-A
UGN-A and TELN-A (UCD pilot station number) parameters should be
assigned with respect to the data assigned by the ASHUN command.
ORIGINAL UCD GROUP OVERFLOW UCD GROUP
To Next Page
Loading...
Need help?
General