ND-70348 (E) CHAPTER 4
Page 651
Revision 4.0
AIECN
AIECN: Assignment of IP Service Echo Canceler Data for NDM
1. General
This command is used to assign, modify, and delete the Echo Canceler data for IP services. The data assigned
by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), upgrad-
ing the NDM at each Local Node (LN).
2. Precautions
1. This command is valid when IPTRK service software is programmed.
2. If both “NODE” and “IPG” parameters are restricted, this command cannot be used.
3. This command is available for Release 9 software or later.
4. “IPG” parameter is available since Release 10 software enhancement.
To Next Page
Loading...
