NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 543
Revision 3.0
ACPE
ACPE: Assignment of Call Pickup Expand Group Data
1. General
This command is used to assign the Call Pickup Expand Group data.
2. Precautions
1. Prior to this command, the assignments of station are required by ACPG command.
2. A maximum of 100 stations can be assigned in a Call Pickup Expand Group.
3. There is no limit to the number of Call Pickup Expand Group.
4. The access code of the Call Pickup Expand Group is assigned by the ASPA command SRV=SSCA, SI-
DA=63.
5. The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
3. Data Entry Instructions
Note: Enter the Station Number to be assigned in “EDIT STN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
TENANT NUMBER
(TN)
STATION NUMBER
(STN)
STATION
NUMBER
(STN)
STATION
NUMBER
(STN)
STATION
NUMBER
(STN)
STATION
NUMBER
(STN)
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
STN
A station number of Call Pickup Group member.
2
3
27
28
52
53
77
78

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English