ND-70348 (E) CHAPTER 4
Page 471
Revision 3.0
ACOC
ACOC: Assignment of Central Office Code
1. General
This command is used to assign C.O. line code and tie line code corresponding to particular trunks.
2. Precautions
1. The Central Office Code (COC) assigned by this command is displayed on ATTCON and also D
term
in-
stead of the trunk number.
2. The COC assigned by this command is used to specify a trunk by the Individual Trunk Access service
feature.
3. This command affects the trunk route assigned the R/L = 1 by the ARTD command.
4. The Listed Directory Number (LDN) can be assigned as COC, and is convenient to identify the trunk.
3. Data Entry Instructions
Enter 4 digits of COC
DC
ROUTE NUMBER
(RT)
TRUNK NUMBER
(TK)
DIGIT CODE
(DC)
REMARKS
To Next Page
Loading...
Need help?
General