ND-70348 (E) CHAPTER 4
Page 334
Revision 3.0
ALGNL
ALGNL: Assignment of Telephone Number Data for LDM
1. General
This command is used to assign the Telephone Number (TELN) for the individual attendant identification avail-
able in the self (local) node only.
2. Precautions
1. This Telephone Number is available in the self (local) node only. If the Telephone Number for the Netfus-
ing Network is required, use the ALGNN command.
2. The system data assignment (ASYDL, SYS1, INDEX513 Data 01hex) is needed to provide the Local Data
Memory (LDM).
3. Before assigning this command, ANPDL / ASPAL commands are required for the numbering plan of the
Telephone Number.
4. Unique Telephone Number (TELN) should be given within a User Group Number (UGN).
3. Data Entry Instructions
TELEPHONE NUMBER (TELN)
MAX. 16 DIGITS
REMARKS
USER GROUP NUMBER
(UGN)
TELN
Assign Telephone Number (Unique TELN
should be given within a UGN)
UGN
1 = User Group Number 1 (Fixed)
1
1
1
1
To Next Page
Loading...
