ND-70348 (E) CHAPTER 4
Page 575
Revision 3.0
ACSAL
ACSAL: Assignment of Connection Service Index A for LDM
1. General
This command is used to assign the call termination for CAS Line and Direct-in Termination (Day Only) for
the Local Node (LN) in Netfusing Network.
2. Precautions
1. The ACFR command assignment is also required to accomplish the trunk incoming call termination service
feature.
2. CAS data at the Satellite Station
(a) It is necessary to set the TEC (Telephone Class) of the CAS Line to “15” in the ASDT command.
(b) A ring-down incoming call from a C.O line is terminated to the CAS Line.
3. When assigning CSIA=3 (Direct-in Termination-outside (Day Only)), the ADC should be assigned by the
ASPD command.
4. Use the ACSIL command instead of this command if Direct-in Termination (Day and Night Mode) or Di-
rect-in Termination (Night Mode) is required.
3. Data Entry Instructions
UGN
Fixed"1."
LOGICAL
ROUTE
NUMBER
(LGRT)
CONNECTION
SERVICE
INDEX A
(CSIA)
1-7
TRUNK
NUMBER
(TK)
USER
GROUP
NUMBER
(UGN)
TELEPHONE NUMBER
(TELN)
ABBREVIATED
DIGIT CODE (ADC)
MAX. 4 DIGITS
TERMINATING STATION
CSIA
1 = CAS Line
2 = Direct-In Termination (Day only)
3 = Direct-In Termination-Outside (Day only)
4-7 = Not used
1 0 0 1 1 or 2
2 0 0 1 3 1
ADC
Enter the abbreviated
digits assigned by
the ASPD command.
0 0 1 1
To Next Page
Loading...
Need help?
General