ND-70348 (E) CHAPTER 4
Page 536
Revision 3.0
AUADL
AUADL: Assignment of UCD Delayed Announcement Data for LDM
1. General
This command assigns the data related to the Delay Announcement - UCD service feature for each Node by
using Telephone Number. The data is written in the Local Data Memory (LDM).
2. Precautions
1. Assign the Telephone Number (LDM) of the UCD member station by using the ASHUL command.
2. A maximum of eight (8) external announcement machines can be assigned per a UCD group.
3. As to the designation of sharing the UCD Announcement Information (ASYDL, SYS1, INDEX804, bit4:
0/1 = per UCD group/Common), be sure to follow the note as mentioned below;
• In case the system data (ASYDL, SYS1, INDEX804, bit4) shall be modified after the UCD Announce-
ment Information has already been assigned, first clear all the data assigned by this command
(AUADL), then the new data is to be reassigned.
4. This command is available since Release 9 software enhancement.
To Next Page
Loading...
