ND-70348 (E) CHAPTER 4
Revision 5.0
ALGDL
ALGDL: Assignment of Login Grade Data for LDM
1. General
This command is used to assign the usable commands according to the Login Grade of each user. Judging from
the grade of each User ID, usable commands are restricted. This data is written in Local Data Memory (LDM).
2. Precautions
1. The AUIDL command determines the Login Grade for each User ID.
2. Maximum of 32 commands can be assigned as the usable command to each Login Grade.
3. This command is available for the software Release 11 or later.
3. Data Entry Instructions
Note:
Click the “Get” button to read out the registered data. In case no data exists, after the message box “No
data has been assigned” appears, the data previously written/read out is displayed on the command list.
LOGIN
GRADE
(GRADE)
1-16
CNT COMMAND CNT CNT CNT
10
1 ASDT
AKYD
2
3
9
10
11
17
18
19
25
26
27
GRADE
Enter the grade in the range
of 1-16.
COMMAND
Designate the command name in “COMMAND” field on the MAT screen
to register the usable commands for each Login Grade. Maximum 32
commands can be assigned per grade depending on the logged-in user.
COMMAND COMMAND COMMAND
Page 228-1
To Next Page
Loading...
Need help?
General