NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 380
Revision 5.0
AHLSN
AHLSN: Assignment of Hot Line Station for NDM
1. General
This command is used to assign the data related to the Hot Line service feature. The data assigned by this com-
mand is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM
at each Local Node (LN).
2. Precautions
1. Prior to assigning this command, the Hot Line station should be given the TEC=14 (Hot Line class) by the
ASDT command. Additionally, TEC=13 (Data Terminal via D
term
) and TEC=18 (Virtual Line Appearance)
can also be able to apply the Hot Line service.
2. If you want to delete the station which applied Hot Line service, delete the Hot Line data by this command
prior to deleting the station number by the ASDT command.
3. When the Hot Line destination is the outside party, assign the Abbreviation Digit Code (ADC) of the speed
calling number by the ASPD command.
4. PS can not be designated as the Hot Line Station.
3. Data Entry Instructions
1=Station
2=Outside party(ADC)
3=Trunk Line
TYPE
Enter CON UGN data when
TYPE=1/2.
CON UGN
Enter CON LGRT / TK data when
TYPE=3 (Trunk Line).
CON LGRT / TK
Enter ADC when TYPE=2 (Outside party).
The ADC should be assigned by the ASPD command.
ADC
When TYPE=1, enter the connected party’s
telephone number.
CON TELN
TRUNK
NUMBER
(CON TK)
OPPOSITE
PARTY'S
LOGICAL
ROUTE
NUMBER
(CON LGRT)
SPEED
CALLING
CODE (ADC)
MAX. 4
DIGITS
DESTINATION
TELEPHONE
NUMBER
(CON TELN)
MAX. 16 DIGITS
DESTINATION
STATION'S
USER GROUP
NUMBER
(CON UGN)
CONNECTION
TYPE
(TYPE)
1-3
HOTLINE
TELEPHONE
NUMBER
(HOT TELN)
MAX. 16 DIGITS
HOTLINE
USER
GROUP
NUMBER
(HOT UGN)
1
1
Fixed 1.
HOT UGN

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English