ND-70348 (E) CHAPTER 4
Page 484-1
Revision 4.0
AHMS
b.) Assignment for Multiple Music-On-Hold
Note:
The LENS of Music-on-hold for HMSC parameter is to be assigned in “TYPE=2” of this command. The
following parameter setting is required.
1=Extended Hold Music
2=Sound Source LENS
TYPE
1=Tenant Number of holding Station
2=Route Number of held Trunk
3=Tenant Number of holding Station and
Route Number of held Trunk
KIND
OPERATION
TYPE
(TYPE)
1/2
OPERATION
KIND
(KIND)
1-3
MUSIC ON
HOLD DATA
(HMSC)
0-15
EXTENSION HOLD
STATION DATA
(STA)
0/1
REMARKS
TENANT
NUMBER
(TN)
ROUTE
NUMBER
(RT)
1-255
Music-On-Hold data. Note
HMSC
External Route Number of DAT which provides the external hold
music source. (Required for “KIND=2” or “KIND=3”)
RT
0/1= -/Specified Music on Hold is sent to station
(Required for “KIND=1.”)
STA
OPERATION
TYPE
(TYPE)
MUSIC ON
HOLD DATA
(HMSC)
0-15
LINE EQUIPMENT NUMBER
(LENS)
MG U G LV
REMARKS
Enter the LENS of the DAT card used as the hold music source.
LENS
2
To Next Page
Loading...
Need help?
General