ND-70348 (E) CHAPTER 4
Page 473
Revision 3.0
ACID
ACID: Assignment of Caller ID Data
1. General
This command is used to assign calling number data for Calling Party Number - Name Assignment and Display
service.
2. Precautions
1. A maximum of 28 calling numbers can be assigned to a single station.
2. This command is available for the software Release 3 or later.
3. Data Entry Instructions
Station Number
(STN)
MAXIMUM 6 DIGITS
Ringer
Pattern
(RGP)
0/1/5/6/7
Service
Kind 1
(SRV1)
Call Forwarding
Index (CFI)
1-3
Tenant Number for
Call Forwarding
(CFI-TN)
Station Number for
Call Forwarding
(CFI-STN)
Abbreviated Digit
Code for C.F.
(ADC) 4 digits
1 = Attendant Console
2 = Station
3 = Outside
Caller ID
(CID)
1-28
CFI
SRV1
1 = C.F. - All Calls
2 = C.F. - Busy Line
3 = C.F. - Don’t Answer
4 = Incoming Permission
5 = Call Block
6 = Distinctive Ringing - Caller ID
TN
Input Type
(TYPE)
1
RGP
This parameter appears
when SRV1 = 6.
This parameter appears when CFI=3.
ADC
These parameters appear when CFI=2.
CFI-TN/CFI-STN
When TYPE=1 (Transfer, Incoming Permission denial) is assigned
To Next Page
Loading...
