NEC NEAX 7400 IMX - ACPEN: Assignment of Call Pickup Expand Group Data for NDM

ND-70348 (E) CHAPTER 4
Page 545
Revision 3.0
ACPEN
ACPEN: Assignment of Call Pickup Expand Group Data for NDM
1. General
This command is used to assign the Call Pickup Expand Group data for Netfusing Service. The data assigned
by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updat-
ing the NDM at each Local Node (LN).
2. Precautions
1. Prior to this command, the assignments of station are required by the ACPGN command.
2. A maximum of 100 stations can be assigned in a Call Pickup Expand Group.
3. There is no limit to the number of Call Pickup Expand Group.
4. The access code of the Call Pickup Expand Group is assigned by the ASPAN command SRV=SSCA, SI-
DA=63.
5. Either Call Pickup Expand Group for LDM or Call Pickup Expand Group for NDM can be executed in a
system. (Both services can’t coexist in a system.)
3. Data Entry Instructions
Note: Enter the Telephone Number to be assigned in “EDIT TELN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
USER GROUP NUMBER
(UGN)
TELEPHONE NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
TELE-
PHONE
NUMBER
(TELN)
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
TELN
A Telephone Number of Call Pickup Group member
2
3
15
16
28
29
41
42
UGN
Fixed to 1