ND-70348 (E) CHAPTER 4
Page 540
Revision 4.0
ACPG
ACPG: Assignment of Call Pickup Group
1. General
This command is used to assign call pickup via the TN and STN.
2. Precautions
1. The maximum number of member stations within each Call Pickup Group is 100.
2. The access code of the Call Pickup Group is assigned by the ASPA command SSC, SID=7.
3. There is no limitation in a Call Pickup Groups within a system.
4. The station can be assigned to only one Call Pickup Group.
5. The phantom number assigned by the APHN command can not be a member station of the Call Pickup
Group.
6. The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
3. Data Entry Instructions
Note:
Enter the Station Number to be assigned in “EDIT STN” box on the display.
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
TENANT NUMBER
(TN)
STATION NUMBER
(STN)
STATION
NUMBER
(STN)
STATION
NUMBER
(STN)
STATION
NUMBER
(STN)
STATION
NUMBER
(STN)
NUMBER
OF
STATIONS
(CNT)
NUMBER
OF
STATIONS
(CNT)
STN
Assign a station number.
2
3
27
28
52
53
77
78
To Next Page
Loading...
Need help?
General