ND-70348 (E) CHAPTER 4
Page 275
Revision 3.0
AADCN
AADCN: Assignment of Additional Digit Translation Data for NDM
1. General
This command is used to assign additional digit information for LCR (Least Cost Routing) activating via Net-
fusing Link. The data assigned by this command is written in the Network Data Memory (NDM) of the Network
Control Node (NCN), updating the NDM at each Local Node (LN).
2. Precautions
1. This command can be used only when logging in to NCN.
2. Before using this command, it must be confirmed that a Pattern Number Location (PNL) has been assigned
in the AOPRN command.
3. Data Entry Instructions
Enter DC additional numbers (not including the
access code for LCR) to be applied to the transmitted
number.
DC
Enter the PNL assigned by the
AOPRN command.
PNL
PATTERN NUMBER
LOCATION
(PNL)
1-999
ADDITIONAL DIGIT INFORMATION
(DC)
MAX. 24 DIGITS
REMARKS
To Next Page
Loading...
Need help?
General