NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 644
Revision 4.0
ANTI
ANTI: Assignment of Node Number/Terminal Number for IP
1. General
This command is used to assign the Node Number to the whole nodes within the network. Node Numbers are
allocated to the FPC (Fusion Point Code in Netfusing network) or PC (Point Code in CCIS network) of every
node.
2. Precautions
1. This command is available for the software Release 9 or later.
2. Station/Terminal Number parameter for H.323 feature is available since Release 10 software enhancement.
3. Data Entry Instructions
NODE NUMBER
(NODE)
MAX. 3 DIGITS
[0-9, *, #, P]
FUSION POINT
CODE FOR
FCCS
(FPC)
1-253
POINT CODE
FOR CCIS
(PC)
1-16383
STATION/TERMINAL
NUMBER
(NUMBER)
REMARKS
Enter the Fusion Point Code (FPC) for
FCCS Networking via IP service.
FPC
Allocate the unique Node Number to the
whole nodes within the network.
NODE
Enter the Point Code (PC) for CCIS
Networking via IP service.
PC

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English