ND-70348 (E) CHAPTER 4
Page 468
Revision 3.0
AAKP
AAKP: Assignment of Attendant Console Key Pattern
1. General
This command is used to set the functions of the top row of Incoming Call Identification (ICI) keys for answer-
ing incoming calls at the Attendant Console.
2. Precautions
1. This command is used for both Business and Hotel Applications.
2. This command can be executed under one of following conditions.
(a) The ATI circuit card is not mounted.
(b) The ATT has been made busy by means of the MB switch on the ATI circuit card.
(c) The DAY/NIGHT key on the ATT is set to the NIGHT position.
3. When the location of keys has been changed, the number of waiting call display (ASYD, SYS2, INDEX 8
and INDEX 9) becomes invalid for the ICI key (Off Hook Alarm Priority Call) programmed by this com-
mand.
4. The attendant console number (ATN) is the number assigned at the TK parameter of the ATRK command.
5. The maximum number of Attendant Consoles should be assigned by the ASYD command, SYS 1, INDEX
9.
To Next Page
Loading...
Need help?
General