NEC NEAX 7400 IMX - AANDE: Assignment of Automatic Number Identification Expansion Data

ND-70348 (E) CHAPTER 4
Page 586
Revision 3.0
AANDE
AANDE: Assignment of Automatic Number Identification Expansion Data
1. General
This command is used to assign ANI data for the number of digits of calling station number and the office code
on each tenant basis for the Automatic Number Identification Expansion (ANIE) Service. (For E911ANI)
2. Precautions
1. This data is available when E911 ANI Office Code Expansion is in service (the ASYD command, SYS 1,
INDEX 246, bit5=1).
2. The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
3. Data Entry Instructions
NUMBER
(TN)
TENANT
CALL
ORIGINATOR
DIGIT
(SKIP) 0-10
OFFICE CODE
TO BE ADDED
(ADD)
1-10
OFFICE CODE (DC)
MAX.10 DIGITS
SKIP
Enter the number of digits skipped
from the original office code.
The office code number to be added.
DC
ADD
Enter the number of digits added
to the original office code.