ND-70348 (E) CHAPTER 4
Page 196
Revision 3.0
ASYD
Note: When the numbering plans within the CCIS Network are unified, assign “0” to this data; otherwise, assign “1”.
SYSTEM
DATA
TYPE (SYS)
TENANT
NUMBER
(TN)
1 – 63
SYSTEM
DATA
INDEX
(INDEX)
0 – 15
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT
215
0
b
0
Overlapping Service
0/1 = Out/In Service
0
b
1
Automatic Change of Night Service
0/1 = Out/In Service
b
2
Kind of ANI Data
when the calling party is a station:
0=LDN Number assigned by AANI com-
mand
1=Calling party’s station number
When the calling party is an Attendant or tan-
dem connection, LDN Number assigned by
AANI command is sent irrespective of this da-
ta.
b
3
Destination restriction for an outgoing trunk
call originated by Passing Dial Tone service
0/1 = Effective/Ineffective
b
4
The office that determines the transfer destina-
tion number in Call Forwarding Assignment-
Attendant Service.
0/1 = Office that sets this service/Office in
which the transferring station is accommodated
Note
0
b
5
Not used
0
b
6
Reverted Call Metering Service
00 = Out of Service
01 = In Service
0
b
7
SYSTEM TN
IMX 1 ~ 63
To Next Page
Loading...
