NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 285
Revision 3.0
ALDNN
b.) TYPE = 1 (TELN) is selected;
c.) TYPE = 2 (To Outside) is selected;
0 = No Night Transfer
1 = TELN
2 = To Outside
3 = ADC
Enter desired DID number to terminate the call to
Attendant Console in Day mode.
USER
GROUP
NUMBER
OF LDN
(L-UGN)
FUSION
POINT CODE
(FPC)
1-253
TENANT
NUMBER
(TN)
TELEPHONE NUMBER OF
LISTED DIRECTORY NUMBER
(L-TELN)
MAX. 16 DIGITS
L-TELN
Enter the FPC of the Node accommodating the
Attendant Console to which DID call to be
terminated.
FPC
TYPE
TYPE
TELEPHONE NUMBER
(TELN)
MAX. 16 DIGITS
Enter the Telephone Number of the destination station to
which the call to be transferred during Night mode.
(Specific ATTCON Number assigned by the ASATN
command cannot be set.)
TELN
1
0 = No Night Transfer
1 = TELN
2 = To Outside
3 = ADC
Enter desired DID number to terminate the call to
Attendant Console in Day mode.
USER
GROUP
NUMBER
OF LDN
(L-UGN)
FUSION
POINT CODE
(FPC)
1-253
TELEPHONE NUMBER OF
LISTED DIRECTORY NUMBER
(L-TELN)
MAX. 16 DIGITS
L-TELN
Enter the FPC of the Node accommodating the
Attendant Console to which DID call to be
terminated.
FPC
TYPE
TYPE
TELEPHONE NUMBER
(DC)
MAX. 16 DIGITS
Enter the outside party number to which the DID call to
be transferred during Night mode.
DC
2
TENANT
NUMBER
(TN)

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English