ND-70348 (E) CHAPTER 4
Page 309
Revision 3.0
AEFR
3. Data Entry Instructions
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0
1
2
3
4
Restriction Data (RES) is assigned in the squares
where RSC1 and RSC2 cross.
0=Restricted 1=Connection is allowed
RES
DNU
D = Day Mode N = Night Mode
U = Urgent Mode
FRI
0 = Station to station call without a station/ATT assistance
1 = Station to station call with a station/ATT assistance
2 = Station to trunk route access without a station/ATT assistance
3 = Station to trunk route with a station/ATT assistance
4 = Trunk incoming call to a station without a station/ATT assistance
5 = Trunk incoming call to a station with a station/ATT assistance
6 = Trunk incoming call to trunk outgoing call (Tandem connection without a station/ATT assistance)
7 = Trunk incoming call to trunk outgoing call (Tandem connection with a station/ATT assistance)
8-31 = Not used
DAY/NIGHT/URGENT
MODE
(DNU)
D/N/U
TENANT
NUMBER
(TN)
FACILITY
RESTRICTION
INDEX(FRI)
0-31
CALLED ROUTE RESTRICTION CLASS (RSC2) 0-15
CALLING ROUTE
RESTRICTION
CLASS (RSC1)
0-15
Note: Default data is all "1".
To Next Page
Loading...
Need help?
General