ND-70348 (E) CHAPTER 4
Page 421
Revision 3.0
ARTDN
LGRT
1-899
FUNCTION
REMARKS
66
DC Dialed Number Confirmation (For ISDN)
0= Sub Addressing
1-15 = DID Addressing Note
Note: Other than
0= Number
of Main Ad-
dress Digits
to be trans-
lated.
67
HKS Hooking Service
0= Out of Service 1= In Service
68
SCF Split Call Forwarding
The call is forwarded to the desired destination assigned at
0= Split C.F.-All Calls (SSC, SID=8), Split C.F.-Busy Line
(SSC, SID=10), Split C.F.-Don’t Answer (SSC, SID=12)
1= C.F.-All Calls (SSCA, SIDA=86), C.F.-Busy Line
(SSCA, SIDA=87), C.F.-Don’t Answer (SSCA, SIDA=88)
This data is valid when
ASYDN, SYS,INDEX 79,
b2 = 1.
69
SMDR4 Detailed billing for incoming in tandem connection.
0= Required 1= Not required
Assign this for the outgoing
route (OGRT) if necessary.
70
TCMN Number of digits of TCM (S Code)
0= No digit 1= 1 digit
2= 2digits 3= Not used
Use this when ONSG/
INSG = 4 (MF).
71
TCMC TCM and KP Sending Sequence
0= KP-ST 1= KP TCM-ST
2= TCM KP-ST 3= KP (TCM)-ST
Use this when ONSG/
INSG = 4 (MF).
72
MFSP Sending Speed
Tone ON Tone OFF Digit/sec.
0= 68 msec. 68 msec. 7.5
1= 56 msec. 56 msec. (CCITT No.5) Note
2= 68 msec. 32 msec. 10
3= 68 msec. 36 msec. 10
4= 48 msec. 48 msec. 10
5= 52 msec. 52 msec. 10
6-15= Not used
(In case of MFC)
0= 24.0 sec. 1= 5.5 sec.
2= 7.0 sec. 3= 8.5 sec.
4= 10.0 sec. 5= 11.5 sec.
6= 13.0 sec. 7= 14.5 sec.
8= 16.0 sec. 9= 17.5 sec.
10= 20.0 sec. 11= 22.0 sec.
12= 24.0 sec. 13= 26.0 sec.
14= 28.0 sec. 15= 30.0 sec.
Note: Use this when
ONSG/INSG
= 4.
To Next Page
Loading...
