NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 425
Revision 3.0
ARTDN
LGRT
1-899
FUNCTION
REMARKS
96
H1 ISDN H1 Switching
0= - 1= In Service
0000Always assign data “0”.
97 DT 0000
98
CI ISDN transmitting information
0= Out of Service
1= 16-Digit Caller Number Service, Attribute Information Notifica-
tion Service, and Calling Sub-Address Transfer Service
2-15= Not used
99 OID 0000Always assign data“0”.
100TKS 0000Always assign data“0”.
101
PAD2 Pad Control Data 2
0-7= For Pad value, See circuit card manual
PAD value can also be set by
switch setting on the 8TLT
(Long Line Telephone =
TELT) card.
102TRM 0000Always assign data “0”.
103 TRPX 0000Always assign data “0”.
104LDR 0000Always assign data “0”.
105TSC 0000Always assign data “0”.
106SATS 0000Always assign data “0”.
107RVPX 0000Always assign data “0”.
108DQ 0000Always assign data “0”.
109
SLOV Slumber Time Override Service
0= Out of Service 1= In Service
0000
110
SDTO System message automatic output when Connection Acknowledge
signal has not been received.
0= Out of Service 1= In Service
111
ADVPRA ISDN PRI Failure Routing Service
0= Out of Service 1= In Service
This data is valid for dummy
routes.
112
IND Inter-office Name Display
0= Out of Service 1= In Service
113UUI 0000Always assign data “0”.
114DCH 0000Always assign data “0”.
115
CMRT Common use of Route Numbers of ISDN trunks
0= Out of Service 1= In Service

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English