EasyManua.ls Logo

NEC NEAX 7400 IMX - Page 447

NEC NEAX 7400 IMX
857 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ND-70348 (E) CHAPTER 4
Page 440
Revision 3.0
ALRNN
66 DC
Dialed Number Confirmation (For ISDN)
0 = Sub Addressing
1-15 = DID Addressing Note
Note: Other than 0=
Number of
Main Address
Digits to be
translated.
67 HKS
Hooking Service
0 = Out of Service 1 = In Service
68 SCF
Split Call Forwarding
0 = Follow station forwarding (CF)
1 = Follow trunk forwarding (Split CF)
This data is valid when
ASYDN, SYS,INDEX
79, b2 = 1.
69 SMDR4
Detailed billing for incoming in tandem connection.
0 = Required 1 = Not required
Assign this for the outgo-
ing route (OGRT) if nec-
essary.
70 TCMN
Number of digits of TCM (S Code)
0 = No digit 1 = 1 digit
2 = 2 digits 3 = Not used
Use this when ONSG/
INSG = 4 (MF).
71 TCMC
TCM and KP Sending Sequence
0 = KP-ST 1 = KP TCM-ST
2 = TCM KP-ST 3 = KP (TCM)-ST
Use this when ONSG/
INSG = 4 (MF).
72 MFSP
Sending Speed
Tone ON Tone OFF Digit/sec.
0= 68 msec. 68 msec. 7.5
1= 56 msec. 56 msec. (CCITT No.5) Note
2= 68 msec. 32 msec. 10
3= 68 msec. 36 msec. 10
4= 48 msec. 48 msec. 10
5= 52 msec. 52 msec. 10
6-15= Not used
(In case of MFC)
0 = 24.0 sec. 1 = 5.5 sec.
2 = 7.0 sec. 3 = 8.5 sec.
4 = 10.0 sec. 5 = 11.5 sec.
6 = 13.0 sec. 7 = 14.5 sec.
8 = 16.0 sec. 9 = 17.5 sec.
10 = 20.0 sec. 11 = 22.0 sec.
12 = 24.0 sec. 13 = 26.0 sec.
14 = 28.0 sec. 15 = 30.0 sec.
Note: Use this when
ONSG/INSG =
4.
LOGICAL ROUTE (LGRT) 1-899
REMARKSFUSION POINT CODE (FPC) 1-253
ROUTE NUMBER (RT) 1-255

Table of Contents

Related product manuals