ND-70348 (E) CHAPTER 4
Page 549
Revision 3.0
AISA_T
3. Data Entry Instruction
Note: The existing data can be readout by pressing “Get” button after UGN and TELN data is entered.
USER
GROUP
NUMBER
(UGN)
MASTER TELEPHONE
NUMBER
(TELN)
Max. 16 digits
STATION
TYPE
(MST/SLV)
NUMBER
OF
BLOCKS
(BLOCK)
1-10
TELEPHONE NUMBER
(TELN)
Max. 16 digits
TELN (MST/SLV)
Enter the Telephone Number of the
Master/Slave station to which Speed
Calling Group data to be assigned.
MST
SLV
1
BLOCK
Assign the number of memory block for
each station. This parameter appears when
"MST" is selected in Station Type.
MST = Master Station
SLV = Slave Station
MST/SLV
Enter the Telephone Number of Master Station
when "SLV" is selected in Station Type.
TELN (MST)
To Next Page
Loading...
Need help?
General