NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 622
Revision 3.0
ACRD
9 FINT - Fusion Interface Specification
0 = FUSION standard
1 - 15 = -
000000
10
FPEG - Fusion - PEG
(Fixed“0”)
0 = Nothing of FUSION - PEG
1 = Exist of FUSION - PEG
000000
11
TC - Timer Class (Fixed“0”)
0 = Not used
1 = 1sec
2 = 2sec
3 = 8sec
4 = 30sec
000000
12
MTC - Miscellaneous Timer Counter
(Fixed“0”)
Timer value = (TC) × (MTC)
000000
13
STSEQ - Status ENQ (Fixed“0”)
Fusion link status check
0 = Available 1 = Unavailable
000000
14
FGH - Fusion Gateway Handler
0/1 = FCH/FGH
15
MMN - Kind of Multiple Equipment
Note:
When CDN 8: TC/EC = 0 (No
MPC/EC), data setting for this
parameter is not required.
0: TDM 1: MM-Node
2: Not Used 3: Not used
16
LKIND - Kind of Fusion Link
0 = DTI
1 = ISW
2 = Fusion over IP (Router)
3 = IPTRK
4 - 5 = Not used
17
IPLYR - Voice over IP
0 = DTI interface 1.5Mbps
1 = DTI interface 2.0Mbps
18
IPTRK - IP Trunk
0 = Out of Service
1 = In Service
CDN
CONNECTION RT No.
(C_RT) 1-1023
FUNCTION (FUNC)

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English