ND-70348 (E) CHAPTER 4
Page 684
Revision 3.0
ATSTN
3. Data Entry Instructions
1 = DP (10pps)
3 = DP/PB
5-11 = Not used
13 = Data Terminal via D
term
14 = Hot Line
16 = Data Terminal via Data Module
17 = Not used
18 = Virtual Line Appearance (for D
term
Multi-Line)
19-22 = Not used
24-26 = Not used
27 = Eight Conference Equipment
28-31 = Not used
2 = PB
4 = DP (20pps)
12 = D
term
15 = CAS Line
23 = ISDN Terminal
TEC
LINE EQUIPMENT
NUMBER
(LENS)
MG U G LV
TELEPHONE
EQUIPMENT CLASS
(TEC)
1-31
ROUTE RESTRICTION
CLASS
(RSC)
0-15
SERVICE FEATURE
CLASS
(SFC)
0-15
Enter the RSC defined by the ARSC command.
Since RSC=0 is preserved for ATTCON, a station
can be used the RSC with a range from 1 to 15.
RSC
Enter the SFC defined by the ASFC command.
Since SFC=0 is preserved for ATTCON, a
station can be used the SFC with a range from
1 to 15.
SFC
LENS
LENS of the physical station
USER GROUP
NUMBER
(UGN)
TELEPHONE NUMBER (TELN)
MAX. 16 DIGITS
FUSION POINT CODE
(FPC)
1-253
TENANT NUMBER
(TN)
STATION NUMBER
(STN)
TELN
Enter the Telephone Number
to be assigned.
TN
Tenant number of the
physical station.
STN
Station number of the
physical Station.
UGN
Fixed to 1.
FPC
Fusion Point Code of designated Telephone Number.
FPC is assigned by the AFMU command.
To Next Page
Loading...
Need help?
General