Nokia 7330 - Eth-Ring; Table 47 Sdp-Using Command; Table 48 Show Service SDP-Using Command Output Fields; Table 49 Eth-Ring Command

Services Overview
102
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 47 sdp-using command
Table 48 describes the command output fields.
Table 48 Show Service SDP-using Command Output Fields
3.17.6.5 eth-ring
Table 49 eth-ring command
Item Description
Syntax sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context show>service
Description Display services using SDP or far-end address options.
Parameters sdp-id — Displays only services bound to the specified SDP ID.
Values: 1 — 17407
vc-id — The virtual circuit identifier.
Values: 1 — 4294967295
far-end ip-address — Displays only services matching with the specified far-end IP address.
Default: SDPs with any far-end IP address.
Label Description
Svc ID The service identifier.
Sdp ID The SDP identifier.
Type Type of SDP: Spoke or Mesh.
Far End The far end address of the SDP.
Oper State The operational state of the service.
Ingress Label The label used by the far-end device to send packets to this device in this service by
this SDP.
Egress Label The label used by this device to send packets to the far-end device in this service by
this SDP.
Item Description
Syntax eth-ring [status]
eth-ring ring-index [path {a|b}]
Context show
(1 of 2)