Virtual Private Routed Network Service
576
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
7.10.12.21 group
Table 631 group command
Table 632 describes the command output fields.
Peer AS The autonomous system number of the advertising router.
Peer Router-Id The router ID of the advertising router.
Local Pref BGP local preference path attribute for the route.
Age The time elapsed since the service was enabled.
Last update The time when BGP was updated last in second/minute/hour (SS:MM:HH) format.
FOM Present The current Figure of Merit (FOM) value.
Number of Flaps The number of flaps in the neighbor connection.
Reuse time The time when the route can be reused.
Path The BGP AS path for the route.
Applied Policy The applied route policy name.
Label Description
(2 of 2)
Item Description
Syntax group [name] [detail]
Context show>router>bgp
Description This command displays group information for a BGP peer group. This command can be
entered with or without parameters.
When this command is entered without a group name, information about all peer groups
displays.
When the command is issued with a specific group name, information only pertaining to that
specific peer group displays.
The ‘State’ field displays the BGP group’s operational state. Other valid states are:
• Up - BGP global process is configured and running.
• Down - BGP global process is administratively shutdown and not running.
• Disabled - BGP global process is operationally disabled. The process must be restarted by
the operator.
Parameters name — Displays information for the BGP group specified.
detail — Displays detailed information.
To Next Page
Loading...
