Services Overview
54
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
3.8 Configuring Global Service Entities with CLI
This section provides information to create subscriber (customer) accounts and
configure Service Distribution Points (SDPs) using the Command Line Interface
(CLI).
Topics include:
• Service Model Entities
• Configuring Customers
• Configuring an SDP
• Service Management Tasks
3.8.1 Service Model Entities
The Nokia service model uses logical entities to construct a service. The service
model contains four main entities to configure a service.
• Service Distribution Points (SDPs)
• Services:
• Configuring a VPLS Service with CLI
• Configuring a VLL Service with CLI
• Configuring an IES Service with CLI
• Configuring a VPRN Service with CLI
• Service Access Points (SAPs)
• Configuring SAP Parameters
3.8.2 Configuring Customers
When configuring a service in the ISAM system, a customer ID is specified. The
customer ID is reserved for future extensions to ISAM, and therefore the default
value 1can be used, or a customer ID can be optionally created with another value.
Optional customer ID parameters include:
• Description
• Contact name
Use the following CLI syntax to create and input customer information:
configure>service# customer customer-id [create]
contact contact-information
description description-string
The following displays a basic customer account configuration:
A:ALA-12>configure>service# info
To Next Page
Loading...
