Nokia 7330 - Re-Enabling an IES Service

FD 100/320Gbps NT and FX NT IHub Services Guide Internet Enhanced Service
Issue: 13 3HH-11985-AAAA-TQZZA 363
6.8.4 Re-enabling an IES Service
To re-enable an IES service that was shut down:
configure>service> ies service-id
[no] shutdown
Example:
configure>service# ies 2000
configure>service>ies# no shutdown
configure>service>ies# exit
6.9 IES Services CLI Command Reference
6.9.1 Command Hierarchies
• Global Commands
• Interface Commands
• Interface SAP Commands
• Show Commands
• Clear Commands
6.9.1.1 Global Commands
configure
— service
— ies service-id [customer customer-id]
— description description-string
— no description
— egress
— rate-limit cir cir-rate pir pir-rate [cbs cbs-size] pbs pbs-size]
— no rate-limit
— ingress
— qos policy-id
— no qos
— rate-limit cir cir-rate pir pir-rate [cbs cbs-size] [pbs pbs-size]
— no rate-limit
— sgt-qos sgt-qos-policy
—[no] sgt-qos
—[no] shutdown
6.9.1.2 Interface Commands
configure
— service
— ies service-id [customer customer-id]
—[no] interface ip-int-name
— address ip-address/mask [netmask] [broadcast {all-ones | host-ones}]
— no address
— arp-timeout seconds