Nokia 7330 - Lease-State; Table 615 Show DHCP6 Summary Output; Table 616 Lease-State Command; Table 617 Show DHCP Lease State Output

Virtual Private Routed Network Service
568
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 615 Show DHCP6 Summary Output
7.10.12.13 lease-state
Table 616 lease-state command
Table 617 describes the command output fields.
Table 617 Show DHCP Lease state Output
Label Description
Interface Name Name of the interface.
SapId The configuration identification.
Used/Max Relay Used — The number of lease-states that are currently in use on a specific interface, that
is, the number of clients on that interface got an IP address by DHCP. This value is
always less than or equal to the ‘Provided’ field.
Max — The lease-populate value that is configured for a specific interface.
Admin Indicates the administrative state.
Oper relay Indicates the operative state.
Item Description
Syntax lease-state [detail]
lease-state [detail] interface interface-name
lease-state [detail] ipv6-address ipv6-prefix[/prefix-length]
lease-state [detail] mac ieee-address
Context show>service>id>dhcp6
Description This command displays DHCP lease state related information.
Parameters interface interface-name - Displays DHCP lease state related information for the specified
interface.
ipv6-address ipv6-prefix[/prefix-length] - Displays DHCP lease state related information for
the specified IPv6 address.
mac ieee-address - Displays DHCP lease state related information for the specified MAC
address.
detail — Displays detailed information for the SAP.
Label Description
IP Address The IPv6 addresses.
MAC Address The MAC adresses.
(1 of 2)