FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private LAN Service
Issue: 13 3HH-11985-AAAA-TQZZA 269
5.16.2.30 vlan-vc-etype
Table 154 vlan-vc-etype command
5.16.2.31 unrestrict-mac-move
Table 155 unrestrict-mac-move command
Item Description
Syntax vlan-vc-etype etype
no vlan-vc-etype
Context configure>service>pw-template
Description This command enables the configuration of an alternate TPID value to be used at the pseudo
wire template level.
The no form of this command disables the configuration of an alternate TPID value.
Default no vlan-vc-etype
Parameters etype - specifies the etype value
Values are:
• hexadecimal: 0x0600 to 0xffff
• decimal: 1536 to 65535
Item Description
Syntax [no] unrestrict-mac-move
Context configure>service>vpls>spoke-sdp
Description By default the following security measures apply to MAC addresses learned on SAP
configured on top of residential ports:
• In case of conflict during MAC address self-learning, a regular access/network/hybrid port
has priority over a residential port.
• MAC address relearning (movement) is not allowed between residential ports.
By setting the unrestrict mac move parameter, above mentioned MAC restrictions are
removed, that is, MAC addresses can freely move between residential/regular ports.
Default no unrestrict-mac-move
To Next Page
Loading...
