Nokia 7330 - Table 698 Show Mirror-Dest Command Output

Mirror Services
624
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 698 describes the command output fields.
Table 698 Show Mirror-dest Command Output
Context show>mirror
Description Displays mirror configuration and operation information.
Parameters service-id - Specify the mirror service ID.
Label Description
Service Id The service ID associated with this mirror destination.
Type Entries in this table have an implied storage type of 'volatile'. The configured mirror
source information is not persistent.
Admin State Up — The mirror destination is administratively enabled.
Down — The mirror destination is administratively disabled.
Oper State Up — The mirror destination is operationally enabled.
Down — The mirror destination is operationally disabled.
Forwarding Class The forwarding class for all packets transmitted to the mirror destination.
Enable Port Id Yes — PPP Port ID Mirroring is enabled.
No — PPP Port ID Mirroring is disabled.
Slice The value of the slice-size, the maximum portion of the mirrored frame that will be
transmitted to the mirror destination. Any frame larger than the slice size will be
truncated to this value before transmission to the mirror destination. A value of 0
indicates that mirrored packet truncation based on slice size is disabled.
Destination SAP The ID of the access or hybrid port where the Service Access Point (SAP) associated
with this mirror destination service is defined.
Egr QoS Policy This value indicates the egress QoS policy ID. A value of 0 indicates that no QoS policy
is specified.
Item Description
(2 of 2)