FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Leased Line Services
Issue: 13 3HH-11985-AAAA-TQZZA 153
4.6.6.10 sap
Table 101 sap command
Table 102 describes the command output fields.
Table 102 Show Service-ID SAP Output Fields
Item Description
Syntax sap sap-id detail
Context show>service>id
Description This command displays information for the SAPs associated with the service. If no optional
parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — The ID of the SAP for which information must be displayed.
detail — Displays detailed information for the SAP.
Label Description
Service Id The service identifier.
SAP The SAP and qtag.
Encap The encapsulation type of the SAP.
Ethertype Specifies an Ethernet type II Ethertype value.
Admin State The administrative state of the SAP.
Oper State The operating state of the SAP.
Flags Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, InterfaceAdminDown,
PortOperDown, PortMTUTooSmall, L2OperDown, SapParamMismatch,
ServiceMTUTooSmall.
Last Status Change The time of the most recent operating status change to this SAP.
Last Mgmt Change The time of the most recent management-initiated change to this SAP.
Admin MTU The desired largest service frame size (in octets) that can be transmitted through the
SAP to the far-end router, without requiring the packet to be fragmented.
Oper MTU The actual largest service frame size (in octets) that can be transmitted through the
SAP to the far-end router, without requiring the packet to be fragmented.
Ingress Filter-Id The ingress filter policy ID assigned to the SAP.
Egress Filter-Id The egress filter policy ID assigned to the SAP.
LLF Admin State Displays the Link Loss Forwarding administrative state.
LLF Oper State Displays the Link Loss Forwarding operational state.
Restricted-tagging Indicates whether restricted-tagging is enabled or disabled on this SAP
To Next Page
Loading...
