FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 465
7.10.2.29 static-route
Table 439 static-route command
Item Description
Syntax [no] static-route {ip-prefix/mask | ip-prefix netmask} [preference preference] [metric metric]
[tag tag] [enable | disable] next-hop {ip-int-name | ip-address} [bfd-enable]
[no] static-route {ip-prefix/mask | ip-prefix netmask}[preference preference] [metric metric]
[tag tag] [enable | disable] black-hole
Context configure>service>vprn
Description This command creates static route entries for both the network, hybrid, and access routes.
When configuring a static route, either next-hop or black-hole must be configured.
The no form of the command deletes the static route entry. If a static route needs to be
removed when multiple static routes exist to the same destination, then as many parameters
to uniquely identify the static route must be entered.
If a static-route command is issued with no cpe-check target but the destination
prefix/netmask and next-hop matches a static route that did have an associated cpe-check, the
cpe-check test will be removed from the associated static route.
Default No static routes are defined.
(1 of 3)
To Next Page
Loading...
