Nokia 7330 - Neighbour

Virtual Private Routed Network Service
592
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 651 routes command
7.10.12.31 neighbour
Table 652 neighbour command
Table 653 describes the neighbor command output fields.
Table 653 Neighbor Output Fields
Item Description
Syntax routes [interface ip-int-name [ip-prefix/prefix-length]]
Context show>router>dhcp6
Description This command displays the routes for DHCP6.
If no IP address or interface name is specified, then all configured routes are displayed.
If an IP address or interface name is specified, then only data regarding the specified route is
displayed.
Parameters ip-int-name — Displays statistics for the specified IP interface.
ipv6-address/prefix-length — Specifies the IPv6 address on the interface.
Values: ipv6-address/prefix: ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0 — FFFF]H
d [0 — 255]D
prefix-length 1 — 64
Item Description
Syntax neighbor [ip-address | ip-int-name | mac ieee-mac-address | summary]
Context show>router
Description This command displays information about the IPv6 neighbor cache.
Parameters ip-address — Specify the IP interface name.
ip-int-name — Specify the address of the IPv6 interface address.
mac ieee-mac-address — Specify the MAC address.
summary — Displays summary neighbor information.
Label Description
IPv6 Address Displays the IPv6 address.
(1 of 2)