Nokia 7330 - Table 93 Show Service Sdp-Using Output Fields; Table 94 ID Command

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Leased Line Services
Issue: 13 3HH-11985-AAAA-TQZZA 147
Table 93 describes the command output fields.
Table 93 Show Service sdp-using Output Fields
4.6.6.6 id
Table 94 id command
Parameters sdp-id — Displays only services bound to the specified SDP ID.
Values: 1 — 17407
vc-id — The virtual circuit identifier.
Values: 1 — 4294967295
far-end ip-address — Displays only services matching with the specified far-end IP address.
Default: Services with any far-end IP address.
Label Description
Svc ID The service identifier.
Sdp ID The SDP identifier.
Type Type of SDP: spoke or mesh.
Far End The far end address of the SDP.
Oper State The operational state of the service.
Ingress Label The label used by the far-end device to send packets to this device in this service by this
SDP.
Egress Label The label used by this device to send packets to the far-end device in this service by this
SDP.
Item Description
(2 of 2)
Item Description
Syntax id service-id {all | base | labels | sap | sdp}
Context show>service
Description Display information for a particular service-id.
(1 of 2)